Kinetronics Static-Wisk Anti-Static-Brushes 700020-141

Code no: 700030

Kinetronics Static Wisk Cleaning brush is particularly suitable for cleaning sensitive surfaces and at the same time removing any existing static charge. The smaller brushes are ideal for removing dust from films or objectives without any danger to the coating. The bigger brushes are used for removing dust and lint from larger surfaces, such as the glass on picture frames, scanner glass, monitors, acrylic surfaces or plastic surfaces.

The brush consists of a mixture of highly-flexible natural fibers and conductive synthetic fibers as well as a handle made of conductive plastic.

After they have been cleaned the treated surfaces are electrically neutral, and hence do not attract any dust particles. For extremely difficult cases there is also a brush with a grounding cable, which particularly effectively removes any charges.

Dirty brushes can be washed without this influencing their anti-static effect. The brushes can be used at temperatures of up to 65°.

The brushes are available in the sizes 20, 30, 60, 100 and 140 mm, and the widths from 100 mm are also available with earthing cables.

 SW-020   20 mm / 0.8“ 700020
 SW-030   30 mm / 1.2“ 700030
 SW-060   60 mm / 2.4“ 700060
 SW-100   100 mm / 4“ 700100
 SW-101   100 mm / 4“ 700101 (with grounding cable)
 SW-140   140 mm / 5.5“ 700140
 SW-141 140 mm / 5.5“ 700141 (with grounding cable)

Subject to errors and technical changes.

This site uses cookies. By continuing to access this site you are accepting the use of cookies by this site. Privacy Notice