NANLITE Forza 300 LED Spot Light

Code no: 3772

Professional, compact daylight spot light for still lifes, portrait photographs, photo and video shots. For even, extremely bright illumination (more than 43000 lux in 1 meter distance with standard reflector) and for obtaining special light effects. Separate control unit.

With 300 W COB LED (Chip On Board). Flicker free light, free from infrared and UV parts. 5600 Kelvin color temperature (daylight/neutral color rendition), CRI = 98, TLCI = 95. Brightness can be adjusted in 1 % increments.

The following lighting effects can be selected: fast and slow flashing, flashing with adjustable flash rate, long and short flash sequences, flash sequences at random intervals as well as the simulation of light changes caused by TV or a defective lamp.

A low-noise cooling fan and a large heat sink allow continuous operation. The cooling fan can be switched off (resulting in reduced maximum brightness).

Sturdy aluminum/plastic housing with swivel/carrying handle, with carbon look on the side.

The spot light is tiltable on a mounting bracket made of aluminum. Mounts on suitable stands or supports with 16 mm (5/8“) standard spigot.

Removable reflector, replaceable with Fresnel attachment or other light affecting attachments with Bowens bayonet (available as optional accessories).

Separate control unit, that can be attached to the light stand via a clamp supplied with the unit. Display shows brightness, lighting effects, radio/DMX channel, cooling fan status, menu functions, etc.

Besides controlling brightness and lighting effects the control unit offers these setting options: rotating the display by 180°, selecting radio/DMX channel address (001 - 512), switching the cooling fan on or off, adjusting the display brightness and turning the function key illumination on or off. In addition there is the possibility of firing light sequences at the push of a button and saving all actual settings against unintentional resetting.

Built-in radio receiver to control the tube light also via 2.4 GHz, either with the WS-RC-C2 radio remote control (optional accessory) or with the smartphone via the NANLINK APP (WS-TB-1 NANLINK Box required as optional accessory).

Note: Free NANLINK APP for iOS can be found in the APP Store, for Android at Google Play.

The light can also be controlled via DMX/RDM (additional accessories required).

Power supply alternatively via the supplied mains adapter or for mobile, mains-independent use with two batteries of the type Sony V-Mount 14.4 - 14.8 V, 12 A or identical batteries (not included). Mains adapter or batteries are attached to the control unit.

Padded carrying case with removable dividers, mesh pocket inside the lid, shoulder strap, shoulder pad with anti-slip protection, carrying handle and tripod holding loops on the lid.

Scope of delivery: spot light, reflector, control unit, connecting cable (2.50 m / 8.2 ft.), clamp for light stand, mains adapter and carrying case.

Specifications:

Light source: one 300 W COB LED
Color temperature: 5600 Kelvin
Color rendering index: CRI = 98
                                 TLCI = 95
Angle of radiation,
   with reflector: 55°
   without reflector: 120°

Max. illuminance (lux):
                with       without   with Fresnel attachment (optional accessory)
                reflector   reflector   Spot 10°   Flood 45°
in 1 m        68060      13200       128680      39805
in 3 m          5795        1630          14250   4500
in 5 m          2035          620          4905       1715
in 9 m            665            215            1660        605

Luminous flux: 29440 lm
Operating voltage: 48 V
Dimensions of the spot light (LxWxH, incl. mounting bracket, without reflector):
approx. 324 x 225 x 123 mm (12.8 x 8.9 x 4.8 in.)
Weight (incl. mounting bracket, without reflector): approx. 2.3 kg (5.1 lbs.)

Mains adapter:
Input: AC 100-240 V, 50/60 Hz, 4 A max.
Output: DC 48 V, 8.4 A